. | # MAME GAMEINIT.DAT v0.232 Latest Update: June 2, 2021 |
| # MAME GAMEINIT.DAT v0.250 Latest Update: December 6, 2022 |
| # Project started: September 10, 2015 |
| # Project started: September 10, 2015 |
| # |
| # |
| # Homepage: https://www.progettosnaps.net/gameinit.dat |
| # Homepage: https://www.progettosnaps.net/gameinit.dat |
| # |
| # |
| # |
| # |
. | # Version: 0.42 |
| # Version: 0.43 |
| # |
| # |
| # |
| # |
| $info=3bagflnz |
| $info=3bagflnz |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=3bagflvt |
| $info=3bagflvt |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=4roses |
| $info=4roses |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn on the machine getting STATISTIC & MANAGEMENT buttons pressed. STATISTICS == Show credits in/out. To cancel statistics press CANCEL for some seconds. MANAGEMENT == Settings. The following menu will show up: HOLD3 == Verify In/Out, even when the stats were cleared. HOLD2 + HOLD4 == Modify maximum bet, pressing HOLD1. Modify minimum bet, pressing HOLD2. Modify percentage (1, 2, 3, 4), pressing HOLD3. Press START to exit from programming mode. |
| Turn on the machine getting STATISTIC & MANAGEMENT buttons pressed. STATISTICS == Show credits in/out. To cancel statistics press CANCEL for some seconds. MANAGEMENT == Settings. The following menu will show up: HOLD3 == Verify In/Out, even when the stats were cleared. HOLD2 + HOLD4 == Modify maximum bet, pressing HOLD1. Modify minimum bet, pressing HOLD2. Modify percentage (1, 2, 3, 4), pressing HOLD3. Press START to exit from programming mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=4rosesa |
| $info=4rosesa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn on the machine getting STATISTIC & MANAGEMENT buttons pressed. STATISTICS == Show credits in/out. To cancel statistics press CANCEL for some seconds. MANAGEMENT == Settings. The following menu will show up: HOLD3 == Verify In/Out, even when the stats were cleared. HOLD2 + HOLD4 == Modify maximum bet, pressing HOLD1. Modify minimum bet, pressing HOLD2. Modify percentage (1, 2, 3, 4), pressing HOLD3. Press START to exit from programming mode. |
| Turn on the machine getting STATISTIC & MANAGEMENT buttons pressed. STATISTICS == Show credits in/out. To cancel statistics press CANCEL for some seconds. MANAGEMENT == Settings. The following menu will show up: HOLD3 == Verify In/Out, even when the stats were cleared. HOLD2 + HOLD4 == Modify maximum bet, pressing HOLD1. Modify minimum bet, pressing HOLD2. Modify percentage (1, 2, 3, 4), pressing HOLD3. Press START to exit from programming mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=alphahob |
| |
| $mame |
| |
| TIPS: |
| |
| Press [ Alt ] to select game "AlphaFighter" or "Head On". |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=ampkr228 |
| $info=ampkr228 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ampkr2b1 |
| $info=ampkr2b1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ampkr2b2 |
| $info=ampkr2b2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ampkr2b3 |
| $info=ampkr2b3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ampkr2b4 |
| $info=ampkr2b4 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=ampkr2jsp |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| Turn ON with Operator Key [ 9 ], then Door Switch [ O ] to enter the Operator Mode. Press Hold 1 [ Z ] to clear page. Turn OFF with Operator Key [ 9 ]. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=ampkr2jspa |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| Turn ON with Operator Key [ 9 ], then Door Switch [ O ] to enter the Operator Mode. Press Hold 1 [ Z ] to clear page. Turn OFF with Operator Key [ 9 ]. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=ampkr2jspb |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| Turn ON with Operator Key [ 9 ], then Door Switch [ O ] to enter the Operator Mode. Press Hold 1 [ Z ] to clear page. Turn OFF with Operator Key [ 9 ]. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=ampkr95 |
| $info=ampkr95 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ampoker2 |
| $info=ampoker2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| Turn ON Operator Key [ 9 ]. Hit the DOOR key [ O ]. After a moment, the Operator Mode will appear. Turn OFF the Operator Key [ 9 ] to allow play, resetting with [ F3 ] if needed. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=amuse |
| $info=amuse |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=amuse1 |
| $info=amuse1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=amuse1a |
| $info=amuse1a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. Press [ F2 ] + [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=animalc |
| $info=animalc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ F2 ] to enter Service Mode while booting or after resetting. Use [ F2 ] to select the option "3. Set Mode", then hit CTRL. Using [ F2 ], keep scrolling the options until you hit "RAM CLEAR". Hold [ CTRL ] key down until you see the screen display "OK". Press [ F3 ] to reboot. |
| Hold [ F2 ] to enter Service Mode while booting or after resetting. Use [ F2 ] to select the option "3. Set Mode", then hit CTRL. Using [ F2 ], keep scrolling the options until you hit "RAM CLEAR". Hold [ CTRL ] key down until you see the screen display "OK". Press [ F3 ] to reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=apple10 |
| $info=apple10 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize NVRAM, Hold ESTATISTICA [ 9 ] and MANAGEMENT [ 0 ] then press RESET [ F3 ]. When you see "RAM-INIZIALIZZATA!", release all keys. |
| To initialize NVRAM, Hold ESTATISTICA [ 9 ] and MANAGEMENT [ 0 ] then press RESET [ F3 ]. When you see "RAM-INIZIALIZZATA!", release all keys. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=arcwins |
| $info=arcwins |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| aristmk4.cpp mame driver |
| aristmk4.cpp mame driver |
| |
| |
| $end |
| $end |
. | |
| $info=armchamp |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To start the game, wiggle left and right rapidly before the message "TROUBLE ON ARM ?" appears. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=armchmp2 |
| $info=armchmp2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=armchmp2o |
| $info=armchmp2o |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=armchmp2o2 |
| $info=armchmp2o2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| After the 'MEMORY TEST', when the 'MOTOR TEST' message comes on the screen, you must move the joystick Left then Right for a second or two in each direction. The Title should soon appear. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=asterix |
| $info=asterix |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=asterixaad |
| $info=asterixaad |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=asterixeaa |
| $info=asterixeaa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=asterixeac |
| $info=asterixeac |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=asterixj |
| $info=asterixj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=atetrisb5 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To start a game, press the ROTATE button. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=athenab |
| $info=athenab |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To enter service mode hold P1 Start [ 1 ] during ROM test. |
| To enter service mode hold P1 Start [ 1 ] during ROM test. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=atlantol |
| $info=atlantol |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To have the high score table properly initialized, the first time you run the game you should go into the dip switch menu, set World Records to 'Erase on Reset', reset the game [ F3 ] and then set the dip switch back to 'Don't Erase'. |
| To have the high score table properly initialized, the first time you run the game you should go into the dip switch menu, set World Records to 'Erase on Reset', reset the game [ F3 ] and then set the dip switch back to 'Don't Erase'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=attackf |
| $info=attackf |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say '01 0000 COINS LEFT'. To proceed, just hit [ F3 ]. Press [ F2 ] for Test-Mode, press [ F1 ]+[ F2 ] for Bookkeeping/Setup |
| The first time you run the game, it will say '01 0000 COINS LEFT'. To proceed, just hit [ F3 ]. Press [ F2 ] for Test-Mode, press [ F1 ]+[ F2 ] for Bookkeeping/Setup |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=autmoon |
| $info=autmoon |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=avengers |
| $info=avengers |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | $info=avengers2 |
| $info=avengersa |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=avengersb |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=avengersc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=avengrgsj |
| $info=avengrgsj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| Press [ F2 ] to enter Test Mode. Hit [ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bbusters |
| $info=bbusters |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bbustersj |
| $info=bbustersj |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bbustersja |
| $info=bbustersja |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bbustersu |
| $info=bbustersu |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bbustersua |
| $info=bbustersua |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| For the game to work properly, you need to calibrate ALL 3 guns! If you try to do only one, as the manual states, the eprom has invalid gun data and the screen go black after rebooting. Fire at indicated spots with P1, P2 and P3 controls. Only then will a proper eprom be made. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bigdeal |
| $info=bigdeal |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Nothing special here, just be patient! It takes about 40 seconds to initiate the game. |
| Nothing special here, just be patient! It takes about 40 seconds to initiate the game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bigdealb |
| $info=bigdealb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Nothing special here, just be patient! It takes about 40 seconds to initiate the game. |
| Nothing special here, just be patient! It takes about 40 seconds to initiate the game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bigkarnk |
| $info=bigkarnk |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Nothing special here, just be patient! It takes about 20 seconds to initiate the game. |
| Nothing special here, just be patient! It takes about 20 seconds to initiate the game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=biliard |
| $info=biliard |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press reset [ F3 ]. When you see 'RAM-INIZIALIZZATA!', release. |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press reset [ F3 ]. When you see 'RAM-INIZIALIZZATA!', release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bjtwinpa |
| $info=bjtwinpa |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Secret Message: Reset game and hold down Player 2 buttons 1 and 2. If you did it fast enough, you will see the message 'Ready?'. If not try again. Press the following Player 1 buttons : 2(x3) 1(x3) 2(x3), 1(x3). If you did this correctly, you should see another message '9th Mar. 1992'. And you are in the test mode. |
| Secret Message: Reset game and hold down Player 2 buttons 1 and 2. If you did it fast enough, you will see the message 'Ready?'. If not try again. Press the following Player 1 buttons : 2(x3) 1(x3) 2(x3), 1(x3). If you did this correctly, you should see another message '9th Mar. 1992'. And you are in the test mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=blaster |
| $info=blaster |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=blasterkit |
| $info=blasterkit |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=blastero |
| $info=blastero |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=blicks |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| At the first start, the message "RAM DATA IS BAD. PUSH RESET BUTTON" will be displayed: press [ F1 ] to start playing. |
| |
| |
| |
| SOURCE: |
| |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| |
| $end |
| $info=blkrhino |
| $info=blkrhino |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bm3 |
| $info=bm3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bm36th |
| $info=bm36th |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bm37th |
| $info=bm37th |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bm3core |
| $info=bm3core |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bm3final |
| $info=bm3final |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| In order to access the game, from version 0.230 of the MAME, we must enter a password. At startup, the "SYSTEM RECOVERY MODE" page will be displayed. To calculate this password you can use the online application "Firebeat RTC Recovery Password" available here: https://987123879113.github.io/firebeatrtc/. Enter the Serial Number and Key Code you see on the screen and then enter the password by moving with the [ 0 ] and [ ' ] keys, confirming with [ F2 ]. If everything has been done correctly on the screen you will read "PASSWORD OK!" and pressing [ F2 ] again the game will start. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| https://youtu.be/WkFOUoZBwOU and https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=bm3rdeaa |
| |
| $mame |
| |
| TIPS: |
| |
| Press fast forward key [ Ins ] to speed up ROM/RAM test. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=bmcmxaac |
| |
| $mame |
| |
| TIPS: |
| |
| Press fast forward key [ Ins ] to speed up ROM/RAM test. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=bmcompmx |
| |
| $mame |
| |
| TIPS: |
| |
| Press fast forward key [ Ins ] to speed up ROM/RAM test. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=bmiidx2 |
| $info=bmiidx2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx3 |
| $info=bmiidx3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx3a |
| $info=bmiidx3a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx3b |
| $info=bmiidx3b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, after booting and when the "DEVICE CHECK" stops with an error, press this key sequence: [ Alt ], [ X ], [ Alt ], [ C ] and finally [ Alt ]. |
| To initialize the game, after booting and when the "DEVICE CHECK" stops with an error, press this key sequence: [ Alt ], [ X ], [ Alt ], [ C ] and finally [ Alt ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx4 |
| $info=bmiidx4 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx5 |
| $info=bmiidx5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx6 |
| $info=bmiidx6 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx6a |
| $info=bmiidx6a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx7 |
| $info=bmiidx7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx7a |
| $info=bmiidx7a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidx8 |
| $info=bmiidx8 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidxc2 |
| $info=bmiidxc2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| At the first start of the game, wait for the word "DEVICE CHECK". After a few seconds the message (in red) "1P START = BACKUP CLEAR" will appear. Now press 1P (the [ 1 ] key) and the BACKUP RAM will be initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidxs |
| $info=bmiidxs |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bmiidxsa |
| $info=bmiidxsa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| Wait a few seconds (if you want to speed up this wait, keep the usual [ INS ] key pressed) until the red writing "E150 BACKUP DATA ERROR" appears in the penultimate line displayed; press [ 1 ] clear the RAM and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=bottl10b |
| $info=bottl10b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bottle10 |
| $info=bottle10 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=brkthrubl |
| |
| $mame |
| |
| TIPS: |
| |
| Keep [ 1 ] & [ 2 ] pressed and hit [ F3 ] to enter test mode, then hit [ 5 ] to proceed through the tests. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=bubblem |
| $info=bubblem |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubblemj |
| $info=bubblemj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubblemu |
| $info=bubblemu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| The first time you run the game, it will say '...BACKUP DATA FAILED'. Press [ F2 ] to enter test mode and exit to start. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubbles |
| $info=bubbles |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubblesp |
| $info=bubblesp |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubblesr |
| $info=bubblesr |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bubbletr |
| $info=bubbletr |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| How to calibrate the guns: hold [ 9 ], press [ F2 ] and shoot at the targets it shows using the crosshair, after you've shot the target press [ 9 ] again to move onto the next one. Once you get back to the start again press [ F2 ] to exit. |
| How to calibrate the guns: hold [ 9 ], press [ F2 ] and shoot at the targets it shows using the crosshair, after you've shot the target press [ 9 ] again to move onto the next one. Once you get back to the start again press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=bubbletrj |
| $info=bubbletrj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold Service 1 [ 9 ] then press [ F2 ] to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 [ 9 ] again to move onto the next one. Once you finished and have returned to the start again, hit [ F2 ]. |
| Hold Service 1 [ 9 ] then press [ F2 ] to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 [ 9 ] again to move onto the next one. Once you finished and have returned to the start again, hit [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=bucky |
| $info=bucky |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buckyaa |
| $info=buckyaa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buckyaab |
| $info=buckyaab |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buckyea |
| $info=buckyea |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buckyjaa |
| $info=buckyjaa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buckyuab |
| $info=buckyuab |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM N2 shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buraiken |
| $info=buraiken |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter Test Mode. Hit [ ↑ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| Press [ F2 ] to enter Test Mode. Hit [ ↑ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=buraikenb |
| $info=buraikenb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter Test Mode. Hit [ ↑ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| Press [ F2 ] to enter Test Mode. Hit [ ↑ Up-ARROW ] once which will bring you to the "Game Mode" selection then press [ Left CTRL ] (Button 1) to return to game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcomm |
| $info=captcomm |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommb |
| $info=captcommb |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommb2 |
| $info=captcommb2 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommj |
| $info=captcommj |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommjr1 |
| $info=captcommjr1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommr1 |
| $info=captcommr1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=captcommu |
| $info=captcommu |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=carnevil |
| $info=carnevil |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game. |
| To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=carnevil1 |
| $info=carnevil1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game |
| To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cas21iwc |
| $info=cas21iwc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, at the first start press [ 9 ] and then [ B ]. |
| To initialize the game, at the first start press [ 9 ] and then [ B ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=cb3f |
| |
| $mame |
| |
| TIPS: |
| |
| If a hopper status error appear when the player try to take score, pressing Key Out [ W ] will discharge the credits won. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=cgold |
| $info=cgold |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=cgold2 |
| $info=cgold2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| aristmk4.cpp mame driver |
| aristmk4.cpp mame driver |
| |
| |
| $end |
| $end |
| $info=champbwl |
| $info=champbwl |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. To proceed, just press [ 1 ] (P1 Start). |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. To proceed, just press [ 1 ] (P1 Start). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=champbwla |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. To proceed, just press [ 1 ] (P1 Start). |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=chmpnum |
| $info=chmpnum |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=chmpnuma |
| $info=chmpnuma |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=chsuper2 |
| $info=chsuper2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=chsuper3 |
| $info=chsuper3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cmpacman |
| $info=cmpacman |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| [ K ] is the hidden key to switch from one game to another. |
| [ K ] is the hidden key to switch from one game to another. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=cmpacmana |
| $info=cmpacmana |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| [ K ] is the hidden key to switch from one game to another. |
| [ K ] is the hidden key to switch from one game to another. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=cmtetris |
| $info=cmtetris |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| [ K ] is the hidden key to switch from one game to another. |
| [ K ] is the hidden key to switch from one game to another. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=cmtetrisc |
| |
| $mame |
| |
| TIPS: |
| |
| Need to press [ K ] / [ L ] to switch between games. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=cmtetrisd |
| |
| $mame |
| |
| TIPS: |
| |
| Need to press [ K ] / [ L ] to switch between games. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=comg5108 |
| $info=comg5108 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After starting, when "GAME INITIALIZATION" is displayed press [ 9 ] and then [ 2 ] to initialize the game. |
| After starting, when "GAME INITIALIZATION" is displayed press [ 9 ] and then [ 2 ] to initialize the game. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=complexx |
| $info=complexx |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=coralr2 |
| $info=coralr2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=couple |
| $info=couple |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=couplei |
| $info=couplei |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=couplep |
| $info=couplep |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| If you get a screen which says "PUSH ANY SWITCH", hold down arrow (default controller down) to access game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cps3bs32 |
| $info=cps3bs32 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled as NO CD, the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly. |
| There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled as NO CD, the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cps3bs32a |
| $info=cps3bs32a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled as NO CD, the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly. |
| There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled as NO CD, the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=critcrsh |
| $info=critcrsh |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To enter into an Advanced Test Mode, keep pressed the Test Button [ F2 ] on the start-up. |
| To enter into an Advanced Test Mode, keep pressed the Test Button [ F2 ] on the start-up. |
| |
| |
| SOURCE: |
| SOURCE: |
| mamenfo.dat |
| mamenfo.dat |
| |
| |
| $end |
| $end |
. | |
| $info=crusnusa11 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| The first time you run the game, it will say 'CALIBRATE CONTROLS...'. Follow the instructions and press [ F2 ] for the next screen. Then the game will automatically start. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=crusnusa20 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| The first time you run the game, it will say 'CALIBRATE CONTROLS...'. Follow the instructions and press [ F2 ] for the next screen. Then the game will automatically start. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=crzmon2 |
| $info=crzmon2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=crzmon2_10 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_11 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_12 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_13 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_14 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=crzmon2_2 |
| $info=crzmon2_2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=crzmon2_3 |
| $info=crzmon2_3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=crzmon2_5 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_6 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_7 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_8 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=crzmon2_9 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=cuoreuno |
| $info=cuoreuno |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunoa |
| $info=cuoreunoa |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunob |
| $info=cuoreunob |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunoc |
| $info=cuoreunoc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunod |
| $info=cuoreunod |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunoe |
| $info=cuoreunoe |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=cuoreunof |
| $info=cuoreunof |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=cybrcyccj |
| |
| $mame |
| |
| TIPS: |
| |
| To enter service mode hold down Service [ 9 ] and tap Test [ F2 ]. |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| |
| $info=czmon |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_12 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=czmon_13 |
| $info=czmon_13 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_15 |
| $info=czmon_15 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_16 |
| $info=czmon_16 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=czmon_17 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_18 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_19 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_2 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_20 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_21 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_22 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_23 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_24 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_25 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_3 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=czmon_4 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=czmon_5 |
| $info=czmon_5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=czmon_6 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=czmon_7 |
| $info=czmon_7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_7a |
| $info=czmon_7a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_7b |
| $info=czmon_7b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8 |
| $info=czmon_8 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8a |
| $info=czmon_8a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8b |
| $info=czmon_8b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8c |
| $info=czmon_8c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8d |
| $info=czmon_8d |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8e |
| $info=czmon_8e |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_8f |
| $info=czmon_8f |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_9 |
| $info=czmon_9 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_9a |
| $info=czmon_9a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_9b |
| $info=czmon_9b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=czmon_9c |
| $info=czmon_9c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| To initialize the game, press [ F2 ] and using [ C ] to go on the "INIT" and pressing [ 1 ]. Now hold down the [ Z ] button for about 5 seconds. Now the game is initialized; press [ F2 ] and [ C ] until you are on the "EXIT" and confirm with [ 1 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=dadandrn |
| $info=dadandrn |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=daytonagtx |
| $info=daytonagtx |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| This game defaults to a MASTER game in a TWIN cabinet setup. This needs to be changed to SINGLE game, UPLIGHT cabinet. When you get the flashing "Network Checking" message, use [ F2 ] to enter Service Mode, use the Left Shift to move to different options and Player 1 Start [ 1 ] to select that option. Highlight LINK ID and change this to SINGLE. Highlight CABINET and change this to UPLIGHT. Move to EXIT then select. Repeat at the main menu. The game will now be configured to start. |
| This game defaults to a MASTER game in a TWIN cabinet setup. This needs to be changed to SINGLE game, UPLIGHT cabinet. When you get the flashing "Network Checking" message, use [ F2 ] to enter Service Mode, use the Left Shift to move to different options and Player 1 Start [ 1 ] to select that option. Highlight LINK ID and change this to SINGLE. Highlight CABINET and change this to UPLIGHT. Move to EXIT then select. Repeat at the main menu. The game will now be configured to start. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=ddragon |
| $info=ddragon |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragon6809 |
| $info=ddragon6809 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragon6809a |
| $info=ddragon6809a |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonb |
| $info=ddragonb |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonb2 |
| $info=ddragonb2 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonba |
| $info=ddragonba |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonu |
| $info=ddragonu |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonua |
| $info=ddragonua |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonub |
| $info=ddragonub |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonw |
| $info=ddragonw |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddragonw1 |
| $info=ddragonw1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key [ ~ ] and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddrkara |
| $info=ddrkara |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ], wait for the FLASH-ROM to initialize, press [ F2 ] again and start playing. |
| Press [ F2 ], wait for the FLASH-ROM to initialize, press [ F2 ] again and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=ddrusa |
| $info=ddrusa |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsom |
| $info=ddsom |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsoma |
| $info=ddsoma |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomar1 |
| $info=ddsomar1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomb |
| $info=ddsomb |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomh |
| $info=ddsomh |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomj |
| $info=ddsomj |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomjr1 |
| $info=ddsomjr1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomjr2 |
| $info=ddsomjr2 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomr1 |
| $info=ddsomr1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomr2 |
| $info=ddsomr2 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomr3 |
| $info=ddsomr3 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomu |
| $info=ddsomu |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomud |
| $info=ddsomud |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ddsomur1 |
| $info=ddsomur1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=defcmnd |
| $info=defcmnd |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defence |
| $info=defence |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defender |
| $info=defender |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defenderb |
| $info=defenderb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defenderg |
| $info=defenderg |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defenderj |
| $info=defenderj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When you first start will be the message: "INITIAL TEST INDICATE - ROM FAILURE". Press [ F3 ] and you can start playing. |
| When you first start will be the message: "INITIAL TEST INDICATE - ROM FAILURE". Press [ F3 ] and you can start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defenderw |
| $info=defenderw |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defenseb |
| $info=defenseb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=defndjeu |
| $info=defndjeu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=demonwld1 |
| $info=demonwld1 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| Hidden Functions: If the 'Invulnerability dip switch' is enabled, you are invulnerable but you may also 'Pause' the game with P2 Start and restart with P1 Start. |
| Hidden Functions: If the 'Invulnerability dip switch' is enabled, you are invulnerable but you may also 'Pause' the game with P2 Start and restart with P1 Start. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=detatwin |
| $info=detatwin |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 17A shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 17A shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dirtfoxj |
| $info=dirtfoxj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dragoona |
| $info=dragoona |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dragoonj |
| $info=dragoonj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dsoccr94 |
| $info=dsoccr94 |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dsoccr94j |
| $info=dsoccr94j |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=dsoccr94k |
| $info=dsoccr94k |
| $mame |
| $mame |
| TIPS: |
| TIPS: |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit). |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=eforest |
| $info=eforest |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| aristmk4.cpp mame driver |
| aristmk4.cpp mame driver |
| |
| |
| $end |
| $end |
| $info=eforesta |
| $info=eforesta |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=eforestb |
| $info=eforestb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=elecyoyo |
| $info=elecyoyo |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=elecyoyo2 |
| $info=elecyoyo2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=elephfam |
| $info=elephfam |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=elephfmb |
| $info=elephfmb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=esckids |
| $info=esckids |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=esckidsj |
| $info=esckidsj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fantjour |
| $info=fantjour |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fantjoura |
| $info=fantjoura |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 13B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=fcockt |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=fcockt_10 |
| $info=fcockt_10 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_11 |
| $info=fcockt_11 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_12 |
| $info=fcockt_12 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_14 |
| $info=fcockt_14 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=fcockt_15 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_16 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_17 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_18 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_19 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_2 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_20 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_21 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt_22 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=fcockt_3 |
| $info=fcockt_3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=fcockt_4 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=fcockt_5 |
| $info=fcockt_5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_6 |
| $info=fcockt_6 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_6a |
| $info=fcockt_6a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_6b |
| $info=fcockt_6b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_6c |
| $info=fcockt_6c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_6d |
| $info=fcockt_6d |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7 |
| $info=fcockt_7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7a |
| $info=fcockt_7a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7b |
| $info=fcockt_7b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7c |
| $info=fcockt_7c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7d |
| $info=fcockt_7d |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7e |
| $info=fcockt_7e |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7f |
| $info=fcockt_7f |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7g |
| $info=fcockt_7g |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_7h |
| $info=fcockt_7h |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_8 |
| $info=fcockt_8 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_8a |
| $info=fcockt_8a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_8b |
| $info=fcockt_8b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt_9 |
| $info=fcockt_9 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2 |
| $info=fcockt2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=fcockt2_10 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_11 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_12 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_13 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_14 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_15 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_2 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=fcockt2_3 |
| $info=fcockt2_3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4 |
| $info=fcockt2_4 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4a |
| $info=fcockt2_4a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4b |
| $info=fcockt2_4b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4c |
| $info=fcockt2_4c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4d |
| $info=fcockt2_4d |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4e |
| $info=fcockt2_4e |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_4f |
| $info=fcockt2_4f |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_5 |
| $info=fcockt2_5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_6 |
| $info=fcockt2_6 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fcockt2_7 |
| $info=fcockt2_7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
. | |
| $info=fcockt2_8 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=fcockt2_9 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=fcockt2a |
| $info=fcockt2a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=ffortune |
| $info=ffortune |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=fhboxers |
| $info=fhboxers |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After 'ERROR ON CARTRIDGE' press [ 9 ] (SERVICE Key) and then [ F2 ] (TEST) to get into the TEST MENU. Select 'SYSTEM ASSIGNMENTS' with SERVICE and press TEST to proceed, then set 'CABINET TYPE' to 1P (one player) and EXIT the test menu. |
| After 'ERROR ON CARTRIDGE' press [ 9 ] (SERVICE Key) and then [ F2 ] (TEST) to get into the TEST MENU. Select 'SYSTEM ASSIGNMENTS' with SERVICE and press TEST to proceed, then set 'CABINET TYPE' to 1P (one player) and EXIT the test menu. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fhunter |
| $info=fhunter |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| aristmk4.cpp mame driver |
| aristmk4.cpp mame driver |
| |
| |
| $end |
| $end |
| $info=fhuntera |
| $info=fhuntera |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, Key in with the Jackpot Key followed by the Audit Key [ F1 ] [ F2 ]. Press PB4, PB5 and PB6 keys simultaneously ([ Z ] + [ X ] + [ C ] keys by default). Press Service (default [ A ]) 4 times until you are in the Setup Screen, showing Printer Pay Limit etc. Press Bet 2 (default [ D ]) to change the Jackpot Win Limit. A higher value is better (3000 max). Key out both the Jackpot and Audit Keys [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| aristmk4.cpp mame driver |
| aristmk4.cpp mame driver |
| |
| |
| $end |
| $end |
| $info=finalap2 |
| $info=finalap2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap2j |
| $info=finalap2j |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap3 |
| $info=finalap3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap3a |
| $info=finalap3a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap3bl |
| $info=finalap3bl |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap3j |
| $info=finalap3j |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalap3jc |
| $info=finalap3jc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalapr |
| $info=finalapr |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalapr1 |
| $info=finalapr1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalaprj |
| $info=finalaprj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=finalaprj1 |
| $info=finalaprj1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| Hold down [ 9 ] and tap [ F2 ]. If you do not get an 'initializing' message followed by the input test, keep doing it until you do. Exit MAME and restart the game, it's now calibrated. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=findlove |
| $info=findlove |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| After 'ERROR ON CARTRIDGE' press [ 9 ] (SERVICE Key) and then [ F2 ] (TEST) to get into the TEST MENU. Select 'SYSTEM ASSIGNMENTS' with SERVICE and press TEST to proceed, then set 'CABINET TYPE' to 1P (one player) and EXIT the test menu. |
| After 'ERROR ON CARTRIDGE' press [ 9 ] (SERVICE Key) and then [ F2 ] (TEST) to get into the TEST MENU. Select 'SYSTEM ASSIGNMENTS' with SERVICE and press TEST to proceed, then set 'CABINET TYPE' to 1P (one player) and EXIT the test menu. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fiveside |
| $info=fiveside |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fl7_2000 |
| $info=fl7_2000 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=fl7_2k16 |
| $info=fl7_2k16 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=fl7_50 |
| $info=fl7_50 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=fl7_500 |
| $info=fl7_500 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=fl7_tw |
| $info=fl7_tw |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| The first time you run the game, it will say 'POWER UP WAIT...DATA ERROR', press Key [ M ] (BET 1) and then Key [ 0 ] twice (BOOKS/STATS/SETUP). For further boots, just press BET 1 button. The real hardware boots straight due to electronic serial number protection. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| To enter the Bookkeeping/Setup mode, press Key [ 0 ] (BOOKS/STATS/SETUP). Use Key [ R ] (RESET) to navigate between pages. Press Key [ 0 ] to exit the Bookkeeping mode. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=foodf |
| $info=foodf |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=foodf1 |
| $info=foodf1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=foodf2 |
| $info=foodf2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=foodfc |
| $info=foodfc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| The first time you run the game, it will say NVRAM FAILED:.... Press P1 - Button 1 to proceed (default [ CTRL ]). The NVRAM will be automatically initialized. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=fvrpitch |
| $info=fvrpitch |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gaiapols |
| $info=gaiapols |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gaiapolsj |
| $info=gaiapolsj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gaiapolsu |
| $info=gaiapolsu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 28B shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=galwars2 |
| $info=galwars2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=garage |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_10 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_11 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_12 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_13 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_14 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_15 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_16 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_17 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_2 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=garage_3 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=garage_4 |
| $info=garage_4 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_4a |
| $info=garage_4a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_4b |
| $info=garage_4b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_4c |
| $info=garage_4c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5 |
| $info=garage_5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5a |
| $info=garage_5a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5b |
| $info=garage_5b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5c |
| $info=garage_5c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5d |
| $info=garage_5d |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_5e |
| $info=garage_5e |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_6 |
| $info=garage_6 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_7 |
| $info=garage_7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=garage_9 |
| $info=garage_9 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=geimulti |
| $info=geimulti |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| When games are first run a RAM error will occur because the NVRAM needs initialising. When ERROR appears, press [ F2 ], then [ F3 ] to reset, then [ F2 ] again and the game will start. |
| When games are first run a RAM error will occur because the NVRAM needs initialising. When ERROR appears, press [ F2 ], then [ F3 ] to reset, then [ F2 ] again and the game will start. |
| |
| |
| TIPS: |
| TIPS: |
| Trivia games "No Coins" mode: if DSW "No Coins" is on, coin inputs are replaced by a 6th button to start games. This is a feature of the PCB for private use. Selection/Poker payout button: if pressed, all coins/credits are gone and added to the payout bookkeeping, shown in the service mode under the coin in total. Last Winner shows the last payout. Payout hardware is unknown. |
| Trivia games "No Coins" mode: if DSW "No Coins" is on, coin inputs are replaced by a 6th button to start games. This is a feature of the PCB for private use. Selection/Poker payout button: if pressed, all coins/credits are gone and added to the payout bookkeeping, shown in the service mode under the coin in total. Last Winner shows the last payout. Payout hardware is unknown. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=gepoker |
| $info=gepoker |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gepoker1 |
| $info=gepoker1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gepoker2 |
| $info=gepoker2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| The first time you run the game, an ERROR appears because the NVRAM needs initializing. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| Press [ F2 ]+[ F3 ] to enter into 'TEST MODE'. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gepoker3 |
| $info=gepoker3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initialising. Press [ F2 ] and then [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| The first time you run the game, an ERROR appears because the NVRAM needs initialising. Press [ F2 ] and then [ F3 ] to enter TEST MODE. Exit with [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=ggreats2 |
| $info=ggreats2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoe |
| $info=gijoe |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoea |
| $info=gijoea |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoeea |
| $info=gijoeea |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoej |
| $info=gijoej |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoeu |
| $info=gijoeu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gijoeua |
| $info=gijoeua |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gldnpkr |
| $info=gldnpkr |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome |
| $info=gnome |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_10 |
| $info=gnome_10 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_11 |
| $info=gnome_11 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_12 |
| $info=gnome_12 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=gnome_13 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_14 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_15 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_16 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_17 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_18 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| |
| $info=gnome_19 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=gnome_2 |
| $info=gnome_2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_2a |
| $info=gnome_2a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_3 |
| $info=gnome_3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_3a |
| $info=gnome_3a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_3b |
| $info=gnome_3b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_3c |
| $info=gnome_3c |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_4 |
| $info=gnome_4 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_5 |
| $info=gnome_5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_5a |
| $info=gnome_5a |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_5b |
| $info=gnome_5b |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnome_7 |
| $info=gnome_7 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=gnome_8 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| |
| SOURCE: |
| |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| |
| $end |
| $info=gnome_9 |
| $info=gnome_9 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnomea |
| $info=gnomea |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnomeb |
| $info=gnomeb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnomec |
| $info=gnomec |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnomed |
| $info=gnomed |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gnomee |
| $info=gnomee |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| Press [ F2 ] to enter in "FIRST MENU", press now [ C ] followed by [ 1 ] to turn on the "INIT" option. Hold [ Z ] for about 5 seconds and the game will be initialized. Now press [ F2 ], then 3 times [ C ] and [ 1 ] to get out there and start playing. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=gokuparo |
| $info=gokuparo |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| The first time you run the game, the EEPROM 7D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=goldenc |
| $info=goldenc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=goldfish |
| $info=goldfish |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gollygho |
| $info=gollygho |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold Service 1 [ 9 ] then press [ F2 ] to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 [ 9 ] again to move onto the next one. Once you finished and have returned to the start again, hit [ F2 ]. |
| Hold Service 1 [ 9 ] then press [ F2 ] to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 [ 9 ] again to move onto the next one. Once you finished and have returned to the start again, hit [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gt507uk |
| $info=gt507uk |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| The first time you run the game, an ERROR appears because the NVRAM needs initialising. Press fast forward ([ Ins ]) key to speed this up. |
| The first time you run the game, an ERROR appears because the NVRAM needs initialising. Press fast forward ([ Ins ]) key to speed this up. |
| |
| |
| SOURCE: |
| SOURCE: |
| mameinfo.dat |
| mameinfo.dat |
| |
| |
| $end |
| $end |
| $info=gticlub |
| $info=gticlub |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gticluba |
| $info=gticluba |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gticlubj |
| $info=gticlubj |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gticlubu |
| $info=gticlubu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=gtroppo |
| $info=gtroppo |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
. | |
| $info=gtsers18 |
| |
| $mame |
| |
| INITIALIZATION: |
| |
| The first time you run the game, an ERROR appears because the NVRAM needs initialising. Press fast forward [ Ins ] key to speed this up |
| |
| |
| |
| SOURCE: |
| |
| mameinfo.dat |
| |
| |
| |
| $end |
| $info=gunnrose |
| $info=gunnrose |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this, followed by pressing the [ W ] key twice. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| At the first start, "CALL ATTENDANT" will flash at the top, to start press in sequence: [ F1 ] and [ F2 ] to do this, followed by pressing the [ W ] key twice. Now press [ Z ] + [ X ] + [ C ] simultaneously; you'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ F2 ]. |
| |
| |
| SOURCE: |
| SOURCE: |
| https://www.progettosnaps.net/gameinit.dat |
| https://www.progettosnaps.net/gameinit.dat |
| |
| |
| $end |
| $end |
| $info=haekaka |
| $info=haekaka |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| Hold [ F2 ] to enter Service Mode while booting or after resetting. Use [ F2 ] to select the option "3. Set Mode", then hit [ 9 ] (Service). Using [ F2 ], keep scrolling the options until you hit "RAM CLEAR". Hold [ 9 ] key down until you see the screen display "OK". Tap [ F3 ] to reboot. |
| Hold [ F2 ] to enter Service Mode while booting or after resetting. Use [ F2 ] to select the option "3. Set Mode", then hit [ 9 ] (Service). Using [ F2 ], keep scrolling the options until you hit "RAM CLEAR". Hold [ 9 ] key down until you see the screen display "OK". Tap [ F3 ] to reboot. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=hangplt |
| $info=hangplt |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=hangpltu |
| $info=hangpltu |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| To re-initialize the EEPROM, hold down the test switch [ F2 ] and tap reset [ F3 ] once. Do not let go of [ F2 ] until you see a message that says 'Initializing EEPROM'. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddriv |
| $info=harddriv |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddriv1 |
| $info=harddriv1 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddriv2 |
| $info=harddriv2 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddriv3 |
| $info=harddriv3 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| |
| |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddrivb |
| $info=harddrivb |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddrivb5 |
| $info=harddrivb5 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddrivb6 |
| $info=harddrivb6 |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the [ 1 ] key here. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Move fully back and to side then turn key again. Just press the 1 key here again to move on. |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| * Take your foot off the brake turn key to abort. Now this is the tricky part. When you see this screen do nothing. Wait for a couple of seconds until it displays New max 4064. Do NOT press the 1 key prematurely here or you will screw up the calibration! |
| |
| |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| Now step on brake firmly and release. Do this by pressing and holding the [ Left Alt ] key for 3 seconds, and then letting go. If all is well, it should display Range 4064 and move on to the game. |
| |
| |
| TIPS: |
| TIPS: |
| Gameplay is choppy at times, but I have enough CPU power? |
| Gameplay is choppy at times, but I have enough CPU power? |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| Although the FPS counter shows 100% speed for these games, they may appear choppy. This is true to the original — even the original hardware of these games struggled with them and therefore the choppiness is actually accurate emulation of these games. You may be able to get rid of it in some cases by using the -cheat parameter, hitting the tilde key and browsing the on screen menu until you find "CPU overclocking". This will run the emulated CPU faster which may or may not fix it. It may also cause the emulation to have errors, so don't bug people if overclocking screws up a game. |
| |
| |
| SOURCE: |
| SOURCE: |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| http://wiki.mamedev.org/index.php/FAQ:Games |
| |
| |
| $end |
| $end |
| $info=harddrivc |
| $info=harddrivc |
| $mame |
| $mame |
| INITIALIZATION: |
| INITIALIZATION: |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| If you are having trouble controlling vehicle or the brake is always on, calibration must be done! |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| First off, Delete any .NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use. You need to understand how the controls are mapped in MAME. It's not very intuitive, so pay attention: |
| |
| |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Steering Wheel: Player 1 Paddle control, by default maps to the mouse and the [ Left/Right Arrow ] keys. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Gas Pedal: Pedal 1 control, by default maps to the [ Left Control ] key. Pressing the key will quickly depress the analog control; releasing the key will release it. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Brake Pedal: Pedal 2 control, by default maps to the [ Left Alt ] key. Operates the same way as the gas pedal. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Clutch Pedal: Pedal 3 control, by default maps to the [ Space ] key. Operates the same way as the gas and brake pedals. |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Key: Maps to Player 1 start button (default: [ 1 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| Abort: Maps to Player 2 start button (default: [ 2 ] key). |
| |
| |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| Finally, here is a step-by-step tour through the calibration process. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Take your hands and feet off all controls then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the [ 1 ] key. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel counterclockwise as far as it will go then turn key. At this point, press and hold the Left key for about 5 seconds. After 5 seconds, press the 1 key while still holding down the left arrow. It should say New min 256. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Turn wheel clockwise as far as it will go then turn key. At this point, press and hold the Right key for about 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the right arrow. It should say Max 3840. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in first then turn key and release. Since first gear is in the upper-left corner, press and hold the [ D ] and [ R ] keys for 5 seconds. After 5 seconds, press the [ 1 ] key while still holding down the [ D ] and [ R ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Put transmission in fourth then turn key again. Since fourth gear is in the lower-right corner, press and hold the [ F ] and [ G ] keys for 10 seconds. After 10 seconds, press the [ 1 ] key while still holding down the [ F ] and [ G ] keys. |
| * Move seat full forward then turn key and release. Since the seat feedback isn't implemente |