diff  gameinit_182.dat
      gameinit_183.dat
1,2c1,2
< # GAMEINIT.DAT v0.182 - Latest Update: January 29, 2017
< #                   Project started: September 10, 2015
---
> # GAMEINIT.DAT v0.183 - Latest Update: February 27, 2017
> #                    Project started: September 10, 2015
6c6,9
< # Version: 0.22 - English
---
> # Version: 0.25 - English
> #
> # WIP Ok until the 'R'. Last edit "Run and Gun")
> #
8d10
< # WIP Ok until the 'Q' ('R' last edit "Racin' Force")
319c321
< Make sure "Audit Key" and "Jackpot Key" are lit up (Leftmost buttons in layout at bottom of screen). Use [ K ] (audit) and [ J ] (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ] + [ X ] + [ C ] simultaneously ( Reset + Aux + Memtest ). You'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
---
> Make sure "Audit Key" and "Jackpot Key" are lit up (Leftmost buttons in layout at bottom of screen). Use [ K ] (audit) and [ J ] (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ]+[ X ]+[ C ] simultaneously ( Reset + Aux + Memtest ). You'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
636,638c638
< 
< Hold Service 1 9 then press F2 to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 9 again to move onto the next one. Once you finished and have returned to the start again, hit F2.
< 
---
> Hold Service 1 [ 9 ] then press [ F2 ] to enter Service Mode. Shoot at the targets it shows using the crosshair. After you've shot the target, press Service 1 [ 9 ] again to move onto the next one. Once you finished and have returned to the start again, hit [ F2 ].
729,731c729
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
744,746c742
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
759,761c755
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
774,776c768
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
789,791c781
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
804,806c794
< 
< With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using F2 to enter and exit).
< 
---
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
819,821c807
< 
< To calibrate the gun use F2 to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press F2 to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press F2 to exit Service mode and return to the game.
< 
---
> To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game.
834,836c820
< 
< To calibrate the gun use F2 to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press F2 to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press F2 to exit Service mode and return to the game.
< 
---
> To calibrate the gun use [ F2 ] to enter Service mode. When the "Carnevil Main Menu" comes up, use the volume keys [ - ] and [ = ] to navigate yourself to the second option "Gun Calibration", then press [ F2 ] to select. Follow the on-screen cues, aiming Left Top and Lower Left for each gun, shooting at the X targets. When complete, navigate to "Exit" in the menu, them press [ F2 ] to exit Service mode and return to the game
849,851c833
< 
< The first time you run the game, an ERROR appears because the NVRAM needs initializing. To proceed, just press 1 (P1 Start).
< 
---
> The first time you run the game, an ERROR appears because the NVRAM needs initializing. To proceed, just press [ 1 ] (P1 Start).
864,866c846
< 
< Press and hold Service 1 + 2 Keys (0 + 9), then press reset (F3). Now the NVRAM has been initialized.
< 
---
> Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized.
879,881c859
< 
< Press and hold Service 1 + 2 Keys (0 + 9), then press reset (F3). Now the NVRAM has been initialized.
< 
---
> Press and hold Service 1 + 2 Keys [ 0 ]+[ 9 ], then press reset [ F3 ]. Now the NVRAM has been initialized.
894,896c872
< 
< You can use F1 to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete.
< 
---
> You can use [ F1 ] to proceed through all the configuration screens, stopping when you see the title screen. Setup is complete.
909,911c885
< 
< Make sure "Audit Key" and "Jackpot Key" are lit up. (Leftmost buttons in layout at bottom of screen). Use K (audit) and J (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press Z + X + C simultaneously ( Reset + Aux + Memtest ). You'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the K and J keys.
< 
---
> Make sure "Audit Key" and "Jackpot Key" are lit up. (Leftmost buttons in layout at bottom of screen). Use [ K ] (audit) and [ J ] (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ]+[ X ]+[ C ] simultaneously (Reset + Aux + Memtest). You'll see a number show up for the value "RF/AMT" if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
924,926c898
< 
< To enter into an Advanced Test Mode, keep pressed the Test Button (F2) on the start-up.
< 
---
> To enter into an Advanced Test Mode, keep pressed the Test Button [ F2 ] on the start-up.
939,941c911
< 
< To initialize the game, turn Service Mode ON F2 and press reset F3. Move pointer to INIT with C, then press 1. Hold Cancel Z for 5 seconds while counter counts down. When complete, turn Service Mode OFF with F2 and restart or reboot.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
954,956c924
< 
< To initialize the game, turn Service Mode ON F2 and press reset F3. Move pointer to INIT with C, then press 1. Hold Cancel Z for 5 seconds while counter counts down. When complete, turn Service Mode OFF with F2 and restart or reboot.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
969,971c937
< 
< To initialize the game, turn Service Mode ON F2 and press reset F3. Move pointer to INIT with C, then press 1. Hold Cancel Z for 5 seconds while counter counts down. When complete, turn Service Mode OFF with F2 and restart or reboot.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
982,985c948
< INIZIALIZZAZIONE:
< 
< 
< Press and hold Service [ 0 ] + [ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release.
---
> INITIALIZATION:
986a950
> Press and hold Service [ 0 ]+[ 9 ], then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release.
989c953
< FONTE:
---
> SOURCE:
1659,1661c1623
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1674,1676c1636
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1689,1691c1649
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1704,1706c1662
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1719,1721c1675
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1734,1736c1688
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1749,1751c1701
< 
< The first time they are launched, these games stop to the "Factory settings restored". To continue simply press F2. If that fails, try F3, or F1 + F2.
< 
---
> The first time they are launched, these games stop to the "Factory settings restored". To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
1779,1781c1729
< 
< The first time you run the game, the EEPROM 17A shows as BAD in the RAM/ROM Check. Hold down the Test switch F2 and then also hit F3 to reset the machine, creating the EEPROM for you.
< 
---
> The first time you run the game, the EEPROM 17A shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you.
1809,1811c1757
< 
< The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch F2 and then also hit F3 to reset the machine, creating the EEPROM for you.
< 
---
> The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you.
1824,1826c1770
< 
< The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch F2 and then also hit F3 to reset the machine, creating the EEPROM for you.
< 
---
> The first time you run the game, the EEPROM 22D shows as BAD in the RAM/ROM Check. Hold down the Test switch [ F2 ] and then also hit [ F3 ] to reset the machine, creating the EEPROM for you.
1884,1886c1828
< 
< Press and hold Service 1 + 2 (Keys [ 0 ] & [ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release.
< 
---
> Press and hold Service 1 + 2 (Keys [ 0 ]+[ 9 ]), then press Reset [ F3 ]. When you see "RAM-INIZIALIZZATA!", release.
1959,1961c1901
< 
< Make sure 'Audit Key' and 'Jackpot Key' are lit up (leftmost buttons in layout at bottom of screen). Use [ K ] ('Audit') and [ J ] ('Jackpot') to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ] + [ X ] + [ C ] simultaneously ('Reset' + 'Aux' + 'Memtest'). You'll see a number show up for the value 'RF/AMT' if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
< 
---
> Make sure 'Audit Key' and 'Jackpot Key' are lit up (leftmost buttons in layout at bottom of screen). Use [ K ] ('Audit') and [ J ] ('Jackpot') to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ]+[ X ]+[ C ] simultaneously ('Reset' + 'Aux' + 'Memtest'). You'll see a number show up for the value 'RF/AMT' if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
1989,1991c1929
< 
< Tenendo premuto il tasto [ 9 ] premere anche [ F2 ] per accedere al 'Service Mode'. Verificare che i valori dei vari controlli siano tutti a zero e premere di nuovo [ F2 ] per iniziare a giocare.
< 
---
> Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit.
2004,2006c1942
< 
< Tenendo premuto il tasto [ 9 ] premere anche [ F2 ] per accedere al 'Service Mode'. Verificare che i valori dei vari controlli siano tutti a zero e premere di nuovo [ F2 ] per iniziare a giocare.
< 
---
> Hold [ 9 ] then press [ F2 ] to enter Service Mode. Verify that controls are set to zero then press [ F2 ] to exit.
2827,2829c2763
< 
< Make sure 'Audit Key' and 'Jackpot Key' are lit up. Leftmost buttons in layout at bottom of screen. Use [ K ] (audit) and [ J ] (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ] + [ X ] + [ C ] simultaneously (Reset + Aux + Memtest). You'll see a number show up for the value 'RF/AMT' if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
< 
---
> Make sure 'Audit Key' and 'Jackpot Key' are lit up. Leftmost buttons in layout at bottom of screen. Use [ K ] (audit) and [ J ] (jackpot) to do this. If you are unable to light both of these up, restart MAME and try again. Press [ Z ]+[ X ]+[ C ] simultaneously (Reset + Aux + Memtest). You'll see a number show up for the value 'RF/AMT' if done correctly. After this value is set, return to the game by taking off the [ K ] and [ J ] keys.
2989,2991c2923
< 
< Quando leggerete "FACTORY SETTINGS RESTORED" (RIPRISTINO IMPOSTAZIONI DI FABBRICA), premete [ F2 ] (Service Mode).
< 
---
> When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode).
3229,3231c3161
< 
< How to play: Insert one or more coins, each coin gives 2 minutes of play time, then press 1 or 2 player game start. Hit enemy 15 or more times to get bonus game. Test Mode: Insert 12 or more coins then press 2 player start.
< 
---
> How to play: Insert one or more coins, each coin gives 2 minutes of play time, then press 1 or 2 player game start ([ 1 ] or [ 2 ]. Hit enemy 15 or more times to get bonus game. Test Mode: Insert 12 or more coins then press 2 player start [ 2 ].
3304,3306c3234
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3319,3321c3247
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3334,3336c3260
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3349,3351c3273
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3364,3366c3286
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3379,3381c3299
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3394,3396c3312
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3409,3411c3325
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3424,3426c3338
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3439,3441c3351
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3454,3456c3364
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3469,3471c3377
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3484,3486c3390
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3499,3501c3403
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release all keys and either reset or restart MAME.
3514,3516c3416
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release [ 0 ] + [ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release [ 0 ]+[ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
3529,3531c3429
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release [ 0 ] + [ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release [ 0 ]+[ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
3544,3546c3442
< 
< Press and hold Service 1 + 2 ([ 0 ] + [ 9 ]), press reset [ F3 ] then release [ 0 ] + [ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
< 
---
> Press and hold Service 1 + 2 ([ 0 ]+[ 9 ]), press reset [ F3 ] then release [ 0 ]+[ 9 ] and you'll see a few rows of numbers appear. Reset or restart MAME.
3559,3561c3455
< 
< The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
3574,3575c3468
< 
< The first time the game is launched, it will stop at "FACTORY SETTINGS RESTORED". To continue simply press [ F2 ] (Service Mode). If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
---
> The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
3588,3589c3481
< 
< The first time the game is launched, it will stop at "FACTORY SETTINGS RESTORED". To continue simply press [ F2 ] (Service Mode). If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
---
> The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
3602,3604c3494
< 
< The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
3617,3619c3507
< 
< The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> The first time they are launched, these games stop to the 'Factory settings restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
6343,6345c6231
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6358,6360c6244
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6373,6375c6257
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6388,6390c6270
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6403,6405c6283
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6418,6420c6296
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6433,6435c6309
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6448,6450c6322
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6463,6465c6335
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6478,6480c6348
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6493,6495c6361
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6508,6510c6374
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6523,6525c6387
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6538,6540c6400
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6553,6555c6413
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6568,6570c6426
< 
< To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ] + [ F3 ].
< 
---
> To initialize the game, turn 'Service Mode' ON [ F2 ]. Move pointer to 'INIT' with Key [ C ] and press [ 1 ] to enter. Hold [ Z ] for 5 seconds while counter counts down, then turn 'Service Mode' OFF with [ F2 ]+[ F3 ].
6628,6630c6484
< 
< Game must be reset once to get the correct graphics.
< 
---
> Game must be reset once (with [ F3 ]) to get the correct graphics.
7218c7072
< $info=sgsafari
---
> $info=redearth
7222,7224c7076
< 
< When you see the black screen, enter the key sequence VXB1 (HOLD 4 [ V ], HOLD 2 [ X ], HOLD 5 [ B ] and START) to initialize the game.
< 
---
> There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled (NO CD), the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly.
7229c7081
< http://wiki.mamedev.org/index.php/FAQ:Games#Super_Gran_Safari
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7233c7085
< $info=sigma2k
---
> $info=redearthr1
7237,7239c7089
< 
< Turn ON with Supervisor Key [ 0 ]. Press 3x HOLD5 [ B ] to enter into page 4 setup. Press HOLD3 [ C ] to navigate between options, and highlight "Clear All Informations". Keep pressed HOLD1 [ Z ] for more than 3 seconds. Turn OFF with Supervisor Key [ 0 ].
< 
---
> There is no avoiding the NVRAM initialization process. In order to use any game that is not labeled (NO CD), the game must be allowed to create a complete and valid NVRAM file. This process takes nearly an hour and only needs to be done once. Once a proper NVRAM is created, the game will start quickly.
7244c7094
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7248c7098
< $info=sigmapkr
---
> $info=resdnt
7252,7254c7102
< 
< Turn ON with Operator Key [ F2 ], then DOOR key [ O ] to enter the Operator Mode. Press Hold 1 [ Z ] to clear page. Turn OFF with Operator Key [ F2 ].
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7259c7107
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7263c7111
< $info=spool99
---
> $info=resdnt_2
7267,7269c7115
< 
< At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7274c7120
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7278c7124
< $info=spool99a
---
> $info=resdnt_2a
7282,7284c7128
< 
< At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7289c7133
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7293c7137
< $info=spool99b
---
> $info=resdnt_2b
7297,7299c7141
< 
< At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7304c7146
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7308c7150
< $info=spool99c
---
> $info=resdnt_2c
7312,7314c7154
< 
< At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7319c7159
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7323c7163
< $info=startrkd
---
> $info=resdnt_2d
7327,7329c7167
< 
< The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7334c7172
< http://www.mameitalia.net/index.php?showtopic=8494#entry95842
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7338c7176
< $info=tgtpanic
---
> $info=resdnt_2e
7340c7178
< TIPS:
---
> INITIALIZATION:
7342c7180
< The game works, you just need to wait out the initialization process which takes in the neighborhood of 7 minutes! Use [ INSERT ] to fast-forward the emulation for a while, if you get impatient.
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7347c7185
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7351c7189
< $info=topgear
---
> $info=resdnt_2f
7355,7357c7193
< 
< Press [ K ] (Audit) and [ L ] (Jackpot), then press [ Z ] + [ X ] + [ C ] simultaneously (HOP RESET + AUX + MEMTEST) until you see the "METER SET 1" screen. Press [ D ] (Play 2 Lines) to increment the minimum cashcade to $5 or above. To return to the game press keys [ J ] and [ K ] again.
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7362c7198
< mameinfo.dat
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7366c7202
< $info=tornado1
---
> $info=resdnt_2g
7370,7372c7206
< 
< The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7377c7211
< http://www.mameitalia.net/index.php?showtopic=8494#entry95842
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7381c7215
< $info=tornado2
---
> $info=resdnt_3
7385,7387c7219
< 
< The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7392c7224
< http://www.mameitalia.net/index.php?showtopic=8494#entry95842
---
> http://wiki.mamedev.org/index.php/FAQ:Games
7396c7228
< $info=umk3
---
> $info=resdnt_6
7398,7401c7230
< TIPS:
< 
< The volume for this game is TOO LOW!
< 
---
> INITIALIZATION:
7403c7232
< When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
---
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
7412c7241,7908
< $info=umk3r10
---
> $info=resdnt_9
> $mame
> INITIALIZATION:
> 
> To initialize the game, turn Service Mode ON [ F2 ] and press reset [ F3 ]. Move pointer to INIT with [ C ], then press [ 1 ]. Hold Cancel [ Z ] for 5 seconds while counter counts down. When complete, turn Service Mode OFF with [ F2 ] and restart or reboot.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=revx
> $mame
> TIPS:
> 
> The volume for this game is TOO LOW!
> 
> When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
> 
> ---
> 
> How do I calibrate the guns? Can I use a real light gun?
> 
> The game will automatically ask you to calibrate the guns when you start the game for the first time. Simply put, use your mouse or keyboard to "target" the top left corner when the game asks so. There aren't any visual cues to help this, so you'll have to go by the numerical coordinates that are visible on the screen. The numbers you see are in a simple 8-bit scale going from 0 to 255. To "target" the top left corner, keep moving your mouse until you get P1 X and P1 Y as near to 0 as possible. The middle is located at about 127, 127, and the bottom right corner as close to 255 as possible. Repeat the process for the second player. As for the light gun, the short answer is no. A longer answer is that the game didn't actually have a light gun — it had analog joysticks mounted as guns, and emulating them with a proper light gun is not viable. Try to use mouse control with this game.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=revxp5
> $mame
> TIPS:
> 
> The volume for this game is TOO LOW!
> 
> When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
> 
> ---
> 
> How do I calibrate the guns? Can I use a real light gun?
> 
> The game will automatically ask you to calibrate the guns when you start the game for the first time. Simply put, use your mouse or keyboard to "target" the top left corner when the game asks so. There aren't any visual cues to help this, so you'll have to go by the numerical coordinates that are visible on the screen. The numbers you see are in a simple 8-bit scale going from 0 to 255. To "target" the top left corner, keep moving your mouse until you get P1 X and P1 Y as near to 0 as possible. The middle is located at about 127, 127, and the bottom right corner as close to 255 as possible. Repeat the process for the second player. As for the light gun, the short answer is no. A longer answer is that the game didn't actually have a light gun — it had analog joysticks mounted as guns, and emulating them with a proper light gun is not viable. Try to use mouse control with this game.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rfjets
> $mame
> INITIALIZATION:
> 
> Use [ F2 ] to enter testmode if no nvram exists. Upon entering service mode, you select: RESET SETTING with Button 1. This will create the valid NVRAM the game needs to boot. Select: EXIT (RESET BOARD) with Button 1 again and the game should start with no problems.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rfjetsa
> $mame
> INITIALIZATION:
> 
> Use [ F2 ] to enter testmode if no nvram exists. Upon entering service mode, you select: RESET SETTING with Button 1. This will create the valid NVRAM the game needs to boot. Select: EXIT (RESET BOARD) with Button 1 again and the game should start with no problems.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rimrockn
> $mame
> TIPS:
> 
> I remember playing a cabinet with that allowed 4 players, but the game is only allowing 2. How do I set this game up for 4 players?
> 
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rimrockn12
> $mame
> TIPS:
> 
> I remember playing a cabinet with that allowed 4 players, but the game is only allowing 2. How do I set this game up for 4 players?
> 
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rimrockn16
> $mame
> TIPS:
> 
> I remember playing a cabinet with that allowed 4 players, but the game is only allowing 2. How do I set this game up for 4 players?
> 
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rimrockn20
> $mame
> TIPS:
> 
> I remember playing a cabinet with that allowed 4 players, but the game is only allowing 2. How do I set this game up for 4 players?
> 
> With this and some other multiplayer games, the default number of players for a cabinet is two — even if the program supports more. You can usually set these settings with a dip switch assignment or adjusting an option in the Service Mode (Using [ F2 ] to enter and exit).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rmpgwt
> $mame
> TIPS:
> 
> The volume for this game is TOO LOW!
> When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rmpgwt11
> $mame
> TIPS:
> 
> The volume for this game is TOO LOW!
> When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=robotron
> $mame
> INITIALIZATION:
> 
> When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=robotronyo
> $mame
> INITIALIZATION:
> 
> When you see "FACTORY SETTINGS RESTORED", hit [ F2 ] (Service Mode).
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rollfr_2
> $mame
> INITIALIZATION:
> 
> Turn on "BK DOOR" and "SERVICE MODE" Dips to ON. Hold [ 9 ]+[ 0 ] then reset the machine [ F3 ] to enter Total Parameters screen. Use [ 0 ] to select "Initialization". Hold [ 9 ] until the game finishes the countdown from 5. When complete, turn Dips mentioned above to OFF and restart MAME if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rollfr_3
> $mame
> INITIALIZATION:
> 
> Turn on "BK DOOR" and "SERVICE MODE" Dips to ON. Hold [ 9 ]+[ 0 ] then reset the machine [ F3 ] to enter Total Parameters screen. Use [ 0 ] to select "Initialization". Hold [ 9 ] until the game finishes the countdown from 5. When complete, turn Dips mentioned above to OFF and restart MAME if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rollfr_4
> $mame
> INITIALIZATION:
> 
> Turn on "BK DOOR" and "SERVICE MODE" Dips to ON. Hold [ 9 ]+[ 0 ] then reset the machine [ F3 ] to enter Total Parameters screen. Use [ 0 ] to select "Initialization". Hold [ 9 ] until the game finishes the countdown from 5. When complete, turn Dips mentioned above to OFF and restart MAME if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcdfr
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrd
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrda
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdb
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdc
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdd
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrde
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdf
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdg
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdh
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=royalcrdt
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), press reset [ F3 ]. When you see "RAM-Initializiert!" or similar message, release all keys. Restart if needed.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungun
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=runguna
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungunad
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungunb
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungunbd
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungund
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungunua
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=rungunuad
> $mame
> INITIALIZATION:
> 
> EEPROM 35E shows up bad - hold down [ F2 ] and TAP Reset [ F3 ] to init the EEPROM properly. When the message appears, let go of [ F2 ].
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=sgsafari
> $mame
> INITIALIZATION:
> 
> 
> When you see the black screen, enter the key sequence VXB1 (HOLD 4 [ V ], HOLD 2 [ X ], HOLD 5 [ B ] and START) to initialize the game.
> 
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games#Super_Gran_Safari
> $end
> 
> 
> $info=sigma2k
> $mame
> INITIALIZATION:
> 
> 
> Turn ON with Supervisor Key [ 0 ]. Press 3x HOLD5 [ B ] to enter into page 4 setup. Press HOLD3 [ C ] to navigate between options, and highlight "Clear All Informations". Keep pressed HOLD1 [ Z ] for more than 3 seconds. Turn OFF with Supervisor Key [ 0 ].
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=sigmapkr
> $mame
> INITIALIZATION:
> 
> 
> Turn ON with Operator Key [ F2 ], then DOOR key [ O ] to enter the Operator Mode. Press Hold 1 [ Z ] to clear page. Turn OFF with Operator Key [ F2 ].
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=spool99
> $mame
> INITIALIZATION:
> 
> 
> At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=spool99a
> $mame
> INITIALIZATION:
> 
> 
> At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=spool99b
> $mame
> INITIALIZATION:
> 
> 
> At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=spool99c
> $mame
> INITIALIZATION:
> 
> 
> At start-up a Test Hardware with 'RAM NG' message pops up. Do a soft reset and keep pressed Start [ 1 ] and Service 1 [ 9 ] until the RAM init message appears.
> 
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=startrkd
> $mame
> INITIALIZATION:
> 
> The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
> 
> 
> SOURCE:
> 
> http://www.mameitalia.net/index.php?showtopic=8494#entry95842
> $end
> 
> 
> $info=tgtpanic
> $mame
> TIPS:
> 
> The game works, you just need to wait out the initialization process which takes in the neighborhood of 7 minutes! Use [ INSERT ] to fast-forward the emulation for a while, if you get impatient.
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=topgear
> $mame
> INITIALIZATION:
> 
> Press [ K ] (Audit) and [ L ] (Jackpot), then press [ Z ]+[ X ]+[ C ] simultaneously (HOP RESET + AUX + MEMTEST) until you see the "METER SET 1" screen. Press [ D ] (Play 2 Lines) to increment the minimum cashcade to $5 or above. To return to the game press keys [ J ] and [ K ] again.
> 
> 
> SOURCE:
> 
> mameinfo.dat
> $end
> 
> 
> $info=tornado1
> $mame
> INITIALIZATION:
> 
> The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
> 
> 
> SOURCE:
> 
> http://www.mameitalia.net/index.php?showtopic=8494#entry95842
> $end
> 
> 
> $info=tornado2
> $mame
> INITIALIZATION:
> 
> The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
> 
> 
> SOURCE:
> 
> http://www.mameitalia.net/index.php?showtopic=8494#entry95842
> $end
> 
> 
> $info=umk3
> $mame
> TIPS:
> 
> The volume for this game is TOO LOW!
> 
> 
> When the game is running, hit [ F2 ] to get to the internal service menu. Hit [ F2 ] again to "close" the service switch so that you won't get stuck in the menu. Now, navigate to the "Volume Adjust" option (following the directions provided) and adjust the volume. It's best to keep the volume no more than 80-90% filled as it might cause your sound to be overdriven and crackle. When adjusted, simply exit the menu.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=umk3r10
7443a7940,7965
> $info=vegasfst
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), then press reset [ F3 ]. Now the NVRAM has been initialized.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
> $info=vegasfte
> $mame
> INITIALIZATION:
> 
> Press and hold Service 1 + 2 Keys ([ 0 ]+[ 9 ]), then press reset [ F3 ]. Now the NVRAM has been initialized.
> 
> 
> SOURCE:
> 
> http://wiki.mamedev.org/index.php/FAQ:Games
> $end
> 
> 
7478,7480c8000
< 
< The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
7493,7495c8013
< 
< The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ] + [ F2 ].
< 
---
> The first time they are launched, these games stop to the 'Factory Settings Restored'. To continue simply press [ F2 ]. If that fails, try [ F3 ], or [ F1 ]+[ F2 ].
7504c8022,8024
< # © 2015/2017  AntoPISA
\ No newline at end of file
---
> # © 2015/2017  AntoPISA
> #
> #
